From: LARRY KLAES (ljk4@msn.com)
Date: Mon Jul 08 2002 - 09:45:21 PDT
----- Original Message -----
From: baalke@jpl.nasa.gov
Sent: Monday, July 08, 2002 12:30 PM
To: undisclosed-recipients:;
Subject: New Spanish Dish Will Aid Interplanetary Communications
http://www.jpl.nasa.gov/solar_system/features/spain_dsn.html
New Spanish Dish Will Aid Interplanetary Communications
Jet Propulsion Laboratory
July 8, 2002
Construction workers erecting steel components atop a new concrete chamber
near Madrid, Spain, this summer are helping NASA study Mars and comets.
They are building a big antenna for the Deep Space Network, which provides
radio communications for spacecraft exploring the solar system. The network
operates clusters of skyward-facing dish antennas at sites in California,
Spain and Australia. The antennas catch radioed information from spacecraft
as near as Earth orbit and as far as more than twice the distance to Pluto.
They also send commands to the spacecraft. JPL administers the network for
NASA.
The Spanish construction job has an important deadline.
NASA needs this new antenna operating by the time an unprecedented peak in
demand for deep-space communications hits in November 2003, said Jeffrey
Osman, Deep Space Network antenna and microwave manager at JPL. During the
following three months, three rovers and two orbiters from the United
States, Europe and Japan will arrive at Mars, two other spacecraft will
encounter comets, and a third comet mission will launch. That's on top of
the continuing communication needs of many other missions.
The new antenna will span 34 meters (112 feet) in diameter and will use an
advanced design called "beam waveguide," which steers the gathered radio
signals to a protected, underground electronics room. The design gives more
reliable operation than the older antenna design with processing gear up in
the dish.
"Construction is on schedule," Osman said. "The concrete pedestal is in
place. The steel is going up. The main reflector portion of the dish will be
lifted as a single piece later this year."
The pedestal encloses the electronics room and will support more than 500
tons of antenna structure.
Custom-made steel pieces for the antenna's giant dish and other components
are being fabricated at the factory in Tarragona, Spain, of the project's
prime contractor, Schwartz-Hautmont Construcciones Metalicas, S.A.
This antenna is the biggest piece in about $54 million worth of improvements
NASA chose as priorities for increasing the Deep Space Network's
capabilities by November 2003.
It will become the network's sixth 34-meter, beam-waveguide antenna. Three
are at the network's Goldstone station near Barstow, Calif. The stations
near Madrid and near Canberra, Australia, each have one already in
operation. Each of the three stations also has a 70-meter (230 foot) antenna
and several smaller ones.
The stations take turns linking with various spacecraft as Earth's rotation
puts the target spacecraft in view of each station in turn.
Putting the new antenna at Madrid gives the biggest possible advantage for
handling the upcoming peak in communications needs, including pictures from
two advanced rovers from JPL that NASA plans to land on Mars in early 2004.
This antenna will add about 70 hours of spacecraft-tracking time per week
during the periods when Mars is in view of Madrid. That's a 33 percent
increase from the station's capacity with its existing antennas.
A coincidence of solar system geometry will intensify demand on network
resources during the crunch period, Osman said: The comet encounters by
NASA's Comet Nucleus Tour spacecraft in November 2003 and by NASA's Stardust
spacecraft in January 2004 will happen in the same direction from Earth as
Mars will be. That will minimize opportunities to have one station track the
comet missions while another tracks the Mars missions.
So, the Madrid construction team keeps its work on schedule in order to have
the new antenna ready when needed. Week-to-week progress can be watched on
the network's Web site, at
http://deepspace.jpl.nasa.gov/dsn/antennas/madrid-gallery.html.
This month, workers will be installing a circular steel track above the
concrete pedestal. The track will provide the precision surface for wheels
the dish will ride on as it turns to find a distant spacecraft with exciting
discoveries to report.
This archive was generated by hypermail 2.1.2 : Mon Jul 08 2002 - 10:01:36 PDT